Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
- Audible alarm signals loss of utility power, overload, low battery and fault conditions
- 6 C13 outlets
- C14 inlet accepts user-supplied AC power cord with country-specific plug
- 350-joule surge suppression rating
Reliable Battery Backup
- Supports half load up to 11.9 min. and full load up to 3.6 min.
- Internal batteries designed for hot-swap field replacement
- 97% line-power efficiency rating saves money in energy costs
2 Load Banks with Switchable Outlets
- Can control 4 outlets remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
- Maintains 230V nominal output over input range of 182V-278V without using battery power
EMI/RFI Line Noise Filtering
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
- Front-panel LCD signals voltage, battery and load statuses
- Supports multiple advanced user setup and operating preferences
- Rotates for easy viewing in rack-mount or tower configurations
Optional Network Management Cards
- Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
- Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
- PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations
- IP-based Auto Probe detects lost connectivity and restores service autonomously
Communications Ports
- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's Power Alert software (available via free download at <li">www.tripplite.com/poweralert)
- <li">EPO port supports emergency shutdown in large facilities
Versatile Installation Options
- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
- Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
- Mounts in upright tower position with optional 2-9USTAND accessory
Product Information |
|
Transource eSKU |
1000315334 |
Manufacturer |
Tripp Lite by Eaton |
Manufacturer Part Number |
SMX1000RT2U |
Manufacturer Website Address |
http://www.tripplite.com |
Brand Name |
Tripp Lite |
Product Line |
SmartPro |
Product Model |
SMX1000RT2U |
Product Name |
SmartPro SMX1000RT2U Rackmountable/Tower UPS |
Product Type |
Line-interactive UPS |
Technical Specifications |
|
Technical Information |
Plug/Connector Type |
IEC 320-C14 |
Receptacle Type |
IEC 60320 C13 |
Receptacle Detail |
6 x IEC 60320 C13 |
Transfer Time |
4 ms |
Power Description |
Load Capacity |
1000 VA/900 W |
Input Voltage |
220 V AC |
Output Voltage |
230 V AC |
Management |
Network Management |
SNMP Manageable |
Interfaces/Ports |
Serial Port |
Yes |
USB |
Yes |
Battery Information |
Backup/Run Time (Full Load) |
3.60 Minute |
Backup/Run Time (Half Load) |
11.90 Minute |
Typical Battery Recharge Time |
4 Hour |
Hot Swappable |
Yes |
Physical Characteristics |
Height |
3.5" |
Width |
17.5" |
Depth |
13.5" |
Rack Height |
2U |
Form Factor |
Rack/Tower |
Weight (Approximate) |
33.40 lb |
Miscellaneous |
Package Contents |
- SmartPro SMX1000RT2U Rackmountable/Tower UPS
- UPS System with 4 post rackmount hardware
- Two 1.8m IEC320-C13 to C14 load jumper cables
- Cabling for USB & DB9 monitoring and EPO switching
- PowerAlert unattended shutdown and UPS/Power monitoring software
- Warranty information
|
Software Included |
PowerAlert monitoring software |
Country of Origin |
China |
Warranty |
Limited Warranty |
2 Year |