Filters
Close

Batteries and Parts

Transource complies w/ EPEAT 4.4.2.4 Required-Battery replacement and information:

Transource offers battery repair and replacement for all notebooks, irrespective of whether the product is out of warranty. Choose the service and repair option that's best for you.

  • Call Transource's IT department (Toll-Free: (888) 544-5120) and provided either, sales order number, serial number or customer information such as phone number, address, and date of purchase.
  • Email our IT department at support@transource.com and provide the above information.

How to remove laptop battery instructions.

Criterion 4.3.1.1 Identification of materials & components requiring selective treatment

RAM Removal (memory card exceeds 10cm^2) - Remove the memory card by pushing down on the tab (yellow arrows point to tab) and pull then pull the card out. This system shows two memory cards installed.

External cable removal - How to unplug-remove external cable from back of PC. Using your fingers remove external cable from the rear of the PC by pulling cable away from the chassis.

Motherboard installation & removal

B2000S components

(Image 1)

The motherboard in the B2000S contains a Lithium-Ion battery that must be removed during recycling. The battery is clipped onto motherboard (see image 1). The battery can be removed by releasing the clip on one side, which will allow the battery to pop out. No special tools required other than fingernail or small screwdriver.

Storage

(Image 2)

The drive will either be an onboard M.2 drive, hard drive or both. The hard drive is removed by pushing the two plastic       ends away from the drive (image 2). The M.2 is removed by pulling up on the plastic black ring (image 3). None of the storage devices are permanently soldered to the motherboard.

(Image 3)

Motherboard with location of battery:

Printed Circuit Board Locations:
One Motherboard = Center of Chassis
One Power Supply= Bottom of Chassis
One or more RAM = Actual part
One Hard Drive = Inside the HD
One M.2 = Actual part
Plastics with Brominated Flame Retardants = Not Present
External Electrical Cable = Power Cable (plugs into of device)

Component locations for B2000M & B3000M

Using your fingers pushdown on the gray tab to release memory/RAM.

Follow component removal instructions as stated above in B2000S PC.

DVD/CD location and removal for B2000M & B3000M

Follow component removal instructions as stated above in B2000S PC.

Component locations for Scorch 1050 & Scorch 2050

Yellow arrows point to motherboard screw locations. Screws are removed with Phillips screwdriver.

Follow component removal instructions as stated above in B2000S PC.

 Follow component removal instructions as stated above in B2000M PC.